You can use the Rackem Trailer Dolly, part # RA20, to move your motorcycle trailer that uses a 2-5/16 inch size hitch ball. This trailer dolly has a 1-7/8 inch hitch ball size. Proper ball fit is necessary when towing, but for moving a trailer with this dolly it is not necessary.
The trailer dolly # RA20, has a tongue weight capacity of 500 lbs. Tongue weight is usually 10 to 15 percent of the trailer weight. As long as you can physically pull the weight yourself and the tongue weight... view full answer...
The Trailer Valet RVR12 Remote-Controlled Trailer Dolly # TV59FR is currently the largest dolly made by trailer valet. It has a weight capacity of 12,000lbs with a maximum tongue weight of 1,200lbs. This is also the highest weight capacity of any of our trailer dolly products. view full answer...
For a trailer dolly that would work well with your 2,000 lb trailer we have the Rackem Trailer Dolly part # RA20 which has a tongue weight capacity of 500 lb which would easily be more than enough for your trailer. view full answer...
We have the Wheel Dolly # PTW54013 which has a weight rating of 1,000 lbs per dolly so as long as the tongue of your boat trailer is supported these should do just fine. view full answer...
If you need to tow your Prius on a tow dolly that does not include built-in lighting then you can easily use a set of magnetic tow lights such as # TLL21RK or # TL21RK. Both these use a 4-pole flat type trailer connector.
The Roadmaster tow dolly # RM-2050-1 has built-in lights. view full answer...
The Trailer Valet XL part # TVXL2 that you referenced can handle small inclines pretty well. If you check out the review video at the 2:30 mark you'll see the dolly being used to push a trailer up a pretty decent incline. view full answer...
It sounds like your military trailer uses a pintle style coupler such as # C48200. Trailer Valet does not offer an adapter for using this type of trailer with their XL Trailer Dolly # TVXL25. The main reason is that military surplus trailers will tend to have much higher tongue weight (TW) than typical agricultural or recreational trailers. This is simply a result of their very strong heavy-duty construction.
The XL Trailer Dolly is rated for up to 1000-lbs of TW. Your trailer could easily... view full answer...
We have the Rack Em trailer dolly part # RA20 which would be your best solution. It has a tongue weight capacity of 500 lbs which your trailer would easily have less than and would allow you to move your trailer around by hand. view full answer...
The Roadmaster tow dolly kit # RM-2050-1 has electric brakes and lighting. Take a look at the attached video for more on this Roadmaster product.
We recommend checking the owner's manual for the vehicle to ensure that it can safely be dolly towed.
We do not offer full-size car hauler type trailers. view full answer...
No, the Replacement Fender Assembly for Demco Kar Kaddy X Tow Dolly # DM66MV will not fit that tire. The # DM66MV is a replacement part for the Demco Kar Kaddy X Tow Dolly # DM9713093 which has wheels/tires that are ST205/75R14. The fenders that we have all fit R14 tires not R15. If you would like to get back to me with what brand and model of Tow Dolly you have, I would be happy to help you further. view full answer...
Take a look at the Replacement Wheel for MaxxTow Trailer Dolly, # FHG23VR. This replacement wheel has a 1 inch wheel hub bore and a 4.10/3.50-6 tire.
This is our only option for that size of tire. view full answer...
We do offer ratcheting tie down kits such as the Bulldog # BDW20230 but these do not bolt-down; they have hooks on each end of the four included no-stretch, high-strength polyester straps. The straps have built-in adjustable loops for wrapping axles. We also offer them individually as part # BDW20229. These are usually used with tie-down anchors like # RR5K.
Your dolly may allow use of these axle straps to avoid the concern about tire damage. It would be a good idea to check with the... view full answer...
For your 2004 Volkswagen Jetta I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24748 since you can only get a 1-1/4" class I receiver on your Jetta. Draw-Tite recommend using their Ball Mount # 3593 with this receiver on your Jetta.
A 1-7/8" Ball # 19256 or 2" Ball # 19258 will be needed to connect to your car dolly.
The Hopkins Tail Light Converter Kit # HM48925 will give you a 4-way flat trailer connection to control the lights on your tow dolly. view full answer...
We have 1 7-Way blade style to 4-Way round adapter. It is # HM47043. The coiled adapter can stretch to 8 feet long and it will glow when connected so you can see it easily in the dark. The 4-Way end would plug into a vehicle side 4-Way since this item is used for flat towing a vehicle. If your tow dolly 4-Way plugs into a a vehicle socket as well you would have to remove the 4-Way on the tow dolly and wire in connector # PK11410 in its place. view full answer...
It sounds like you're just needing to activate the reverse light function on a standard 5-Way connector so your boat trailer actuator will use the lockout for you to move the trailer around by hand with your dolly. I don't know of any handheld 12V power sources but you should be able to use a small battery like what you find with a breakaway kit # 50-85-313 and then wire the power only to the last pin on a 5-Way like part # HM47910 to send power to the lockout function on your actuator.
It... view full answer...
Base plates are not an option for the 2017 Nissan Rogue. My suggestion is to use the Roadmaster Tow Dolly with Electric Brakes, # RM-2050-1 as this vehicle can not be flat towed.
The benefit of a tow dolly is that they are typically about the same price as a flat towing setup yet require much less install time and are easily transferred to future vehicles.To use a tow dolly with electric brakes the RV will also need a brake controller. I recommend the Tekonsha Prodigy P3 Trailer Brake... view full answer...
For cases where your tow dolly does not include lights the way the Roadmaster # RM-2050-1 does, we can help you with a set of easy-to-install and cost-effective towing lights.
The linked page displays all of the removable tail light kits we have for flat towing. Most are magnetic mount like the # TL21RK. Both of these have a 4-pole flat trailer connector but we also have a kit that uses a 6-pin plug, # SPL30B-6. view full answer...
The Trailer Valet RVR12 Remote-Controlled Trailer Dolly # TV59FR battery is not removable from the rover itself. Only the batteries from the remote can be removed and replaced. This is their heaviest duty unit which would work best in a commercial environment. It would be best to have multiple units since the average battery life is 30 minutes with a charge time of 2 hours. view full answer...
There are tow bars that fit multiple vehicles. The problem is that the vehicles will require base plates/mounting brackets and these are vehicle specific. A better choice would be a tow dolly like # RM-2050-1. With this tow dolly you can tow your vehicle without having to install a tow bar or mounting bracket. This adjustable tow dolly features self-steering wheels and electric brakes for easy, secure transport. Ideal for cars with front-wheel drive automatic transmissions. Not all vehicles... view full answer...
Because the front of vehicle will be slightly raised while situated on the tow dolly, you would not want to a hitch at the rear of the towed vehicle, this downward angle would probably cause drag issues. One option and the most straight forward, would be to go with an adapter such as # D210. This has a lower hitch for the tow dolly and then a higher opening for accessories. You will need to verify weight ratings and fitment of dirt bike and current components such as tow dolly against... view full answer...
Go To Results